A-BLADE Dental Gutta Percha-Points Cutting Teeth + Heated Tooth Gum Cutter Tip

Description

Part 1------
Dental Gutta Percha Teeth Gum Cutter A-BLADE
Feature
：
1. Design ingenious , Shape beautiful , Conform to the human body engineering
2. Wireless mode , Operation ,flexible, convenient
3. Rapid heating , highest temperature of 260º C
4. High-capacity can be charged Nickel cadmium battery, charging time 3 hours
5. Fever needle can be sterilized by high temperature and high pressure , repeated use.
Technical Paraments
:
1. Charger voltage: AC1
1
0
V or
2
2
0V
50/60HZ
2. Battery: 1.2V 2400mAh
3. Power2.5W
4. Weight: about 305g
Packing List:
1x main unit
4x tips
1x Box
1x English manual
Charging
：
1
.
First,charge the instrument by connecting the charging station to a mains power socket
2
.
Plug the handipece into the socket in the charging station . While the instrument is charging,the LED lights up on the handpiece.
Use
:
Fit a cutting tip onto the handpiece.Make sure that the angle of the tip is pointing in the opposite direction to the operating button,This makes work easier.
Important
:
Never bend the tip while it is still in the handpiece.
1
.
Insert the cutting tip into the cavity while it is cold (without pressing the operating button).The gutta-percha point to be cut off must be encircled by the loop of the cutting tip.
2
.
As soon as the cutting tip is located directly on the canal access,press the operating button.
3
.
The tip heats up in seconds and the gutta-percha point can be quickly and cleanly removed.
4
.
After the point has been cut off ,release the operating button. The cutting tip immediately cools down and can be removed from the patient
＇
s mouth .The operating button is a “contact button” which only switches the button is released,the instrument switches off.
5
.
Remove the cutting tip from the handpiece after use.
Attention
:
Please don
＇
t continue to press the button more than 30 seconds.
Part 2------
Heated Gutta Cutter tips
Packing: 4Pcs/pack
Net Weight: 10.4g
For Gutta Percha Point Heating Cutter Tooth Gum
Warning:
Before each patient, the cutting tips must be cleaned and sterilized
*Any residues remain on the tip can be removed by cotton wool.
*When used properly, the tips can be autoclaved on more than 25 times(at 121℃ at least 20 minutes and at 132℃/134℃ at least 5 minutes).
On Sep-17-20 at 01:05:07 PDT, seller added the following information: