Duro STEEL JANUS 12' Wide by 10' Tall 1950 Series Insulated Roll-up Door DiRECT

Description

Duro Economical Commercial Low Headroom
Model 1950i
Steel
12' by 10' Insulated
Roll up Door Includes                                        Reduced Drive Chain Hoist
Economical Commercial Roll up Door
The value engineered model 1950 is the first of the next generation of roll up sheet doors to feature a substantial economic advantage. This door features innovative components that make the Model 1950 more versatile, flexible and easy to install
and service in a variety of field applications, particularly
Boat/RV Warehouses and out Buildings.
Self-Storage Door Features
General Description
Light duty applications for frequent usage
Utilizes 9 ½” drum wheel
Maximum opening size of 12’ wide x 14’ high (168 sq.ft.)
Push-up, hand chain and electric operations
Curtain
26-gauge galvanized corrugated steel
Grade 80 galvanized steel
20 standard colors (special colors upon request for a nominal upcharge)
Linear polyester paint coatings, which are heat and corrosion resistant
Wash coat over primer interior side
25-year film integrity warranty — up to 25-year chalk and fade
Flexible nylon wear strips
Bottom Bar
24 gauge acrylic-coated galvalumed roll formed steel
2” x 1 ½” galvanized angle
Bulb astragal (Durometer 75)
Stainless steel nuts and bolts
Axle/Torque Tube
1” O.D. steel axle, 14-gauge
Oil tempered torsion springs conforming to ASTM A229
16-gauge, 9 ½” diameter galvanized drum
Low friction, grease-filled steel ball bearings staked in each drum
26 gauge spiral torque tubing that houses axle assembly
Guides
16 gauge galvanized
Vinyl guide wear strip
Bolt on head stop ¼” thick steel
2 ¼” guide depth
Pre-punched for lock and attachment bolts
Universal jamb mount
Hardware
Bottom bar mounted 10 gauge slide locks - 2 per door
Bottom bar mounted 16 gauge step plate - 2 per door
16 gauge door mounting bracket
1” tension holding device
Options
Insulation Series 1950 (R-value 4)
Top draft stop
Side draft stop
Header seal
Chain hoist 4:1 reduction
Electric operator
Hood
Steel mounting plates
Stainless steel mini latch
We Sell More Than Parts - We Also Sell Steel Buildings!
High Quality I-Beam Buildings by Duro Steel
Highly versatile and perfect for any commercial industrial, farm, or consumer application. Each building is custom designed to your specification, and still accommodates your county wind and snow load. It will meet or exceed industry standards and regional requirements.
Our steel commercial buildings, with few width limitations, allow you to erect huge metal buildings with clear spans widths of 100 to 200+feet (30-60+ meters). An excellent choice of American-made structures: from airplane hangars to mini-storage type buildings with multiple interior units with individual exterior doors.
High Quality Arch Buildings by Duro Steel
Duro Span hut is defined as any self-supporting structure, usually in an "arch" or curved shape. There are no interior posts, trusses or support beams of any kind. The exterior sheeting is the building. To assemble an Duro Span building, you first layout each individual section of the arch on the ground (each section is usually no bigger then 8-12 feet long (3-4 meters).
You bolt all the sections together to make the first arch. You pull up the assembled arch and attach it to its foundation. Each additional section is assembled in the same manor and attached to the other standing arches. Each arch is usually about 2 feet wide (1/2 meter). To make the building longer, just add more arches. There is no limit as to how long this building can be. End walls may be provided by the manufacturer, or you can build your own. Unique to the Duro Span arch type steel building is you can leave one or both ends completely open without losing the integrity of the structure.
For more information about our complete line of steel buildings, please
Visit our eBay Store!
Duro Parts
Questions? Contact us today through eBay.
SHIPS FROM: GA, TX, AZ, FL, CA
All Content ©2015 Duro Steel Buildings & Steel Building Building Parts